Content Comparison

...

1. Run the MobaXTerm Application from the start menu -  Once the MobaXTerm window opens you will need to select the settings button at the top of the page.  Next click on the X11 tab and set the X11 display mode to “Multiwindow mode”: X11 server integrated into Windows Desktop” and click OK.  This only needs to be set once.  See below

   Image RemovedImage Added

2. If prompted to restart the X11 server.  Select yes

   Image RemovedImage Added

3. In the “find existing session or server name” enter Olympus.ece.tamu.edu (or use apollo.ece.tamu.edu or hera.ece.tamu.edu) in the “find existing session or server name” box.  Please use OLYMPUS, it 6 times the resources of Apollo or Hera.

4. On the next screen select ssh as the session type and select OK.  You can specify your username on this screen if you wish.  Click OK

5. You will be prompted to accept the server host key.  Click Yes

6. Login to Olympus (or Apollo or Hera)

7. If using Olympus, use the proper load-ecen-### command for your course.  For additional information on using Olympus, see Olympus Cluster Information.

Method 2 - using Xming + PuTTY

...

1. Run the XMing program (you will not see any windows open, this runs in the background)

2. Open Putty and check the Enable X11 forwarding box under ssh – x11 on the left side of the putty configuration window.

   Image RemovedImage Added

3. Scroll up, click on the session category and enter the name of the system (in this case Olympus.ece.tamu.edu) you want to attach to.

   Image RemovedImage Added

4. Login to Olympus and use the proper load-ecen-### command for your course.  For additional information on using Olympus, see Olympus Cluster Information

...

1. Click the 🔎 icon and search for MobaXterm. See Figure 3. Click MobaXterm Personal Edition.

   Image RemovedImage Added

2. Click Start local terminal

3. Type the command:

   1. ssh -Y your_netid@olympus.ece.tamu.edu

   2. You should always use Olympus for your labs, hera.ece.tamu.edu and apollo.ece.tamu.edu have limited resources and are easily overloaded.

4. You will get a prompt asking for your password, type it and press Enter.

5. If using Olympus, use the proper load-ecen-### command for your course.  For additional information on using Olympus, see Olympus Cluster Information

Method 2 - using Putty and XMing

...

1. Run the XMing program (you will not see any windows open, this runs in the background).

2. Next Open Putty and check the Enable X11 forwarding box under ssh – x11 on the left side of the putty configuration window.

   Image RemovedImage Added

3. Scroll up, click on the session category and enter the name of the system (in this case Olympus.ece.tamu.edu) you want to attach to.

   Image RemovedImage Added

4. Login to Olympus and use the proper load-ecen-### command for your course.  For additional information on using Olympus, see Olympus Cluster Information.