Versions Compared

Old Version 3

changes.mady.by.user Cody Janak (Unlicensed)

Saved on

compared with

New Version Current

changes.mady.by.user Cody Janak (Unlicensed)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

NoMachine is the only supported method of remote connection for Macs on campus. These instructions will show ou you how to remote into an office or research lab Mac device.

Note

You will need to install NoMachine on both NoMachine must be installed on BOTH computers. You can download the client for your personal machine here.

Note

The remote computer you are accessing must be connected to the TAMU network via Ethernet

Info

You will need to know the IP address of the remote computer to be able to connect to it. Also, the remote computer

Table of Contents

you are accessing must be connected to the TAMU network via Ethernet.

Connecting from

...

Windows

...

  1. Install the NoMachine client using the Self-Service Portal

    1. Please note, it may take up to 20 minutes to install. You will receive a security prompt once the software is installed.

  2. Connect to the TAMU network:

    1. If you are on campus, connect to the Wi-Fi network “TAMU_WiFi” or “eduroam.”

    2. If you are off campus, connect to your local Wi-Fi network, then open . Open the Cisco AnyConnect VPN application and log in using with your NetIDand password.

  3. Install NoMachine on your Windows device and start the application

  4. Click the Add buttonicon

  5. Image RemovedEnter a friendly computer name and the Image Added

    Edit the following fields under Machine address:

    1. Name: e.g. MacBook Pro

    2. Host: IP address of your machine

    , then click Connect

    1. e.g. 10.10.10.10

      1. If you do not know the IP address, please contact engr-helpdesk@tamu.edu for assistance.

    2. Click Connect

  6. Image RemovedImage Added

    If the IP address is valid, it will prompt you to put in your credentials. Enter the local username and password for the Mac device you are trying to access. If you would like NoMachine to remember your credentials, check the “Save Save this password in the connection file” file box.

    Image RemovedImage Added

  7. If the connection is successful, you will be shown general tips for using the menu. It is recommended to read through the tips once, but you can check the box for each if you don’t want to see the tips every time you connect

    Image Removed

    .

    Image Added

Info

If you are unable to connect, your Firewall rules may not be configured correctly. Please send an email to engr-helpdesk@tamu.edu for assistance with this issue.