Page Comparison

...

Note
You must be connected to the TAMU network for this installation. This can be through either TAMU WIFI or VPN. The installation will not complete properly if the device is not on the TAMU network.

Use USB from Zachry 383
1. Do not use ANSYS Website
Plug USB into the user’s device and navigate to D:\ANSYS2024R2
Create a “Temp” directory file on the user’s C drive.
Image RemovedImage Removed
Copy the “Base” Folder to the new “Temp” folder.
Image RemovedImage Removed
Open the Base folder in Temp Navigate to the link below and login to Microsoft 365 with your TAMU credentials:
Engineering Software Distribution
Select your current operating system from the options available.
Image Added
Select the Base folder.
Image Added
Three ISO files are contained within this folder, download the entire folder as shown below.
Image Added
Navigate to the download location of the folder, right click the zipped folder, and
extract the file by clicking Extract All.
Image Added
1. This will create a new unzipped folder of the same name containing the Base folder and the three ISO files as shown below.
  Image Added
Right-click each of the ISO files and select Mount.
Image Added
1. This will mount a temporary disk to the next available drive letter.
2. Ensure that this is done for each of the ISO files.
3. If done correctly, you will have one temporary drive for each disk as follows:
  Image Added
4. If the ISO files do not have Mount as an option then you may need to download 7zip.
  Get 7zip
Open the first mounted disk and open the Setup application.
Image Removed
Select “Install Image Added
In the installation launcher, select Install Ansys Products.”
Image RemovedImage Added
Agree to the license agreement and select Next>.
Image Removed
Ensure “Associate file extensions with Ansys products” is selected Image Added
Leave the default options and select Next>
Leave the default installation path as C:\Program Files\ANSYS Inc
Image Removed
Leave default selected products and click Next>.
Image Removed
.
Image Added
Insert hprc-license.tamu.edu in the Hostname section and select Next>.
1. Allow access to all firewall requests if prompted.
  Image Added
Leave Pre-selected Installation Options as default and select Next>.
Image Added
Leave Interface Configuration values as default and select Next>.
Image RemovedImage Added
CAD installs are automatically detected. Select Next>.
Image RemovedImage Added
Review install settings and select Next>.
Image Removed
Once the installation reaches 100%, select Next>
Image Removed
1. Takes 20-30 minutes
Licensing Settings 2024 R2 window will open
Image Removed
Check the Enabled toggle.
Image Removed
Input the following
1. Port: 1055
2. Server 1: Insert hprc-license.tamu.edu
3. leave Server 2 and Server 3 blank
  Image Removed
Select Test to check the server's status, and a check will appear. Select Save.
Image Removed
1. If the test fails, ensure the port and server information is correct
Exit and launch ANSYS
1. Startup file can be found at C:\Program Files\ANSYS Inc\v242\Framework\bin\Win64\runwb2.exe.
  Image Removed
Create shortcut on desktop for easier access to the program.
Image RemovedImage Added
Wait for the Software to install and fill in the Drive Letters as shown below:
1. At roughly 42% installation, the installer will generate a prompt requesting the next drive.
2. Enter the drive letter for Disk 2 and select Ok.
  Image Added
3. At roughly 64% it will generate another prompt requesting the next drive.
4. Enter the drive letter for Disk 3 and select Ok.
  Image Added
Once the installation reaches 100%, select Next>.
Image Added
Exit the installer and launch Ansys to verify the software is running properly.

Versions Compared

Old Version 11

New Version Current

Key